Home » Our Products » Ovens/Incubators » Ovens » Natural Gravity Convection Oven Bottom Heated

NATURAL GRAVITY CONVECTION OVEN BOTTOM HEATED MSW-211 (NC)


BENEFITS & ADVANTAGES
  • Low cost, fully equipped, all purpose laboratory ovens for sample drying, baking, annealing, conditioning, sterilizing, evaporating and dehydrating, and other general laboratory work.
  • Fully factory tested
  • Sturdy construction of PCGI (Powder coated Galvanized Steel) .
  • Damper controlled gravity air circulation
  • Corrosion resistant galvanized steel interior OR of Stainless Steel (SS-304 grade) (Option)
  • Primary hydraulic control thermostat sets desired oven temperature. Red pilot light indicates heater operation.
  • Heat is transferred from the bottom up through the oven chamber by natural convection and exits through vent in the oven sides. Fresh air inlet damper at the oven bottom provides control of the amount of fresh air entering the oven.
  • Synthetic door gasket made of neoprene on the double walled door.
  • User oriented design of shelves makes you adjust each space of shelves without difficulty.
  • Heating elements are placed at bottom.
  • Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat dissipation.
  • Door fitted with heavy duty hinges and door handle ensuring there are no leakages through the door gasket.
  • To work on 220/230V AV, 50/60 Hz supply.
TECHNICAL SPECIFICATION & ORDERING INFORMATIONS


MODEL #NCO-28 # NCO -45 # NCO -95 # NCO -125 # NCO -224
Internal Dimension (WXDXH) (mm) 300x300x300 355x355x355 455x455x455 455x455x605 605x605x605
Capacity 28 ltrs 45 ltrs 95 ltrs 125 ltrs 224 ltrs
Heat Load 0.75 KW 0.75 KW 1.50 KW 1.50 KW 2.25 KW
No. of Shelves 2 2 2 2 2
Temperature Range 50OC to 250OC
MOC (Outer) Powder Coated Electro Galvanized Steel Sheet
MOC (Inner) Galvanized Steel Sheet OR Stainless Steel Sheet (Option)
Temp. Controller Hydraulic type capillary thermostat
Temperature Accuracy +1 OC
Temp. Display Thru prismatic thermometer


MODEL # NCO -252 # NCO -336 # NCO -500 # NCO -750
Internal Dimension (WXDXH) (mm) 605x455x910 605x605x910 600x900x900 900x900x900
Capacity 252 ltrs 336 ltrs 500 ltrs 750 ltrs
Heat Load 2.25 KW 2.25 KW 3.75KW 4.5 KW
No. of Shelves 3 3 3 3
Temperature Range 50OC to 250OC
MOC (Outer) Powder Coated Electro Galvanized Steel Sheet
MOC (Inner) Galvanized Steel Sheet OR Stainless Steel Sheet (Option)
Temp. Controller Hydraulic type capillary thermostat
Temperature Accuracy +1 OC
Temp. Display Thru prismatic thermometer
OPTIONS
  • Microprocessor based PID Digital Temperature Indicator-Cum-Controller in lieu of hydraulic type capillary thermostat.
  • Semi Automatic (SAD) Microprocessor Based PID Digital Temperature Indicator-Cum-Controller with Integrated timer once the set/desired valve is achieved the in built Automatic Digital Minute Timer starts automatically. Once this set time period is over the heaters are switched "OFF" automatically and the unit sounds a Buzzer, thus alerting the user that process in complete.