OF FUME HOOD:
Fume Suction Hood
||Comply to ASHRAE-110 Standards
for face velocity
|Fume Hood Structure
||Aerodynamic Floor Mounted.
|Air Flow Type
||Low Constant Volume Exhaust Type
|Noise Level (At Main Body)
||<60db sound levels (Blower to
be mounted on a remote mounting kit)
||Electro Galvanized Steel Powder
Coated Sheets (EGS-PCCRC). Outer Panel Sheet 18 SWG and
Structure Frame 18 SWG & 20 SWG sheet in the Base Cabinet.
||Traditionally our work tops are
made of thick DISHED CORED from various options of MOC to choose
from, and are even thicker at MARINE EDGES, thus preventing
spillages and accidental damages. Chemical resistance splash &
spilledge proof Granite/SS-304/FRP (as per customer requirement)
work top having skirting from all the side, to prevent chemical
||Made of PP/Porcelain Sink, to
collect chemical waste on Work top.
|Inner chamber vertical liner
||Chemical & Heat Resistance,
Fire retardent, smooth finish, easily cleanable, panel made out
of PRL integral work (6mm thick).
|Epoxy Powder Coating
||Powder coated with highly
chemical resistant epoxy colors.
||Unique designed removeable back
baffle captures and removes or slides fumes instantly at much
||Our Valves have fine control
over utilities as per international standards and withstands 200
PSI pressure & brass fitting for gas connections. 1 No. for
Water, 1 No. for Nitrogen, 1 No. Compressed Air, 1 No. for
||3-point suction system (for
light, normal and heavy fumes) with baffle and fined horizontal
slots aids in distributing the flow of air.
||Aerodynamic Design, Horizontal
fixed airfoil mounted on work top, made up of SS 304, provides
spill retention and safe ventilation of fumes generated with
||Fluroscent light (40 Watt x 2
Nos.) with vapour- Proof for proper illumination. Intensity
approx 400lux on work top.
||2 Nos. 15 Amp. Sockets &
Switches. 1 No. MCB Switch for the Blower.
||Scaffold/Grid, to hold the
apparatus. It covers the entire length of Fume Hood installed at
a distantce of approx. 150mm from the from backside of Fume
||A Unique design pattern of
Exhaust Port ensures that the fumes will get exhausted smoothly
w/o any turbulance at exhaust port, even it takes care of low
noise as well.
||Craftly tapered and flanged
exhaust collar reduces airflow turbulances induces high static
pressures reduces noise levels to minimal and also increases
face velocity exhaust.
||SISW type, Chemical & heat
resistance heavy duty epoxy coated blower with aerodynamically
balanced Impeller, with Drain plug. Consisting of continuous
rating motor and chemical resistant. Blower will give face
velocity of 80 to 100 Feet/minute (FPM) and a high static
pressure at defined sash position. It satisfies all national and
international safety velocity norms.
|Maximum Air Exhaust Air Volume
||Minimum face velocity of 0.5m/s
or 100 fpm at defined sash position
||3 Phase TEFC, IP55, class F
|Front Top Panel
||Easly openable panel, to access
Damper & to light fixture, for maintenance purpose.
||Vertical rising sash
counter-balanced with pulley & counter weight system.
Toughned float glass (4mm thick). Clear open able height of
||All the front and side service
panels are pre-fabricated and demountable for on-site errections
and commissioning, provides easy access to service lines,
utility, electrical utilities for maintenance and user
||Specially designed levelling
feet for balancing of cabinets and work tables as well as for
height corrections and alignment vis-a-vis any floor
|Base Cabinet (OPTION)
||Base cabinet is capable of
receiving load of Fume Hood on its top with following features:
- * Complete rigid steel structure to support Fume Hood.
- * Attractive Color combination on Epoxy powder coated
- * Double skin shutters / Doors.
- * One removable horizontal partition to store the
chemicals with one shelf
- * Locking system with self closing hinge.
- * Shutters mounted to the modules are detachable
concealed hinges self closing on return.
Self Closing Hinges
Three dimensionally adjustable and crome plated self closing
hinges have a 900 opening. All the shutters are detachable and
easy to mount.
Modular and adjustable shelf height for flexibility to store
chemicals, glasswares, accessories etc.
All shutters and drawer fronts are double skinned and are
sandwitched and stuffed for extra rigidity and strength.
||Rigid ducting of PVC with bends,
dampers, transitions and clamps upto blower. All joints are
curved in order to avoid any back tracking of fumes and a smooth
flow to exhaust fumes.
|External Dimensions (WXDXH) mm
|Internal Dimensions (WXDXH) mm